Size systems

Ring sizes in inches: the US formula and an inch-to-mm table

By the Ring Size Tools editorial team · Updated 2026-11-05 · How we calculate sizes

The US ring size scale is defined in inches: the inside diameter is 0.458 inch plus 0.032 inch for every size, so US 7 is 0.682 inch (17.32 mm) across and 2.143 inches (54.42 mm) around. Always check whether an inch value is a diameter or a circumference before converting.

The formula

US sizes in inches and millimeters

US sizeDiameter (in)Diameter (mm)Circumference (in)Circumference (mm)
30.55414.071.74144.21
40.58614.881.84146.76
50.61815.701.94149.31
60.65016.512.04251.87
70.68217.322.14354.42
80.71418.142.24356.97
90.74618.952.34459.53
100.77819.762.44462.08
110.81020.572.54564.64
120.84221.392.64567.19
130.87422.202.74669.74
140.90623.012.84672.30
150.93823.832.94774.85

Calculated from the US scale formula.

Worked example: a string measured in inches

A string around the finger measures 2¼ inches (2.25 in). That is 57.15 mm of circumference, which is US 8.07, nearest 8. Read the ruler carefully: 2¼ in and 2.25 in are the same, but 2.5 cm is not.

Fractional inch diameters

Diameter (fraction)Decimal (in)mmNearest US
9/16 in0.562514.293¼
5/8 in0.625015.885¼
21/32 in0.656216.676¼
11/16 in0.687517.467¼
23/32 in0.718818.268¼
3/4 in0.750019.059
25/32 in0.781219.8410
13/16 in0.812520.6411

Older American ring gauges and some vintage listings give diameters as fractions of an inch. Nearest US quarter size from the US scale.

Inch mistakes to avoid

Convert any value with the mm to inches converter or the ring size converter.

Sources

Size values on this page are calculated with the Ring Size Tools conversion engine from the published definitions listed on the methodology page. Fit advice is attributed to the sources above.