Fit guide
Left vs right hand ring size: how big the difference is
By the Ring Size Tools editorial team · Updated 2026-11-05 · How we calculate sizes
The ring finger on your dominant hand is usually about half a size larger than on the other hand. GIA says that for a right-handed person the left ring finger is typically smaller than the right by about half a size, and vice versa. Always measure the exact finger on the exact hand the ring will be worn on.
How much is half a size?
| Right hand (dominant) | Left hand estimate | Left circumference |
|---|
| US 5.5 | US 5 | 49.31 mm |
| US 6 | US 5.5 | 50.59 mm |
| US 6.5 | US 6 | 51.87 mm |
| US 7 | US 6.5 | 53.14 mm |
| US 7.5 | US 7 | 54.42 mm |
| US 8 | US 7.5 | 55.70 mm |
| US 9 | US 8.5 | 58.25 mm |
| US 10 | US 9.5 | 60.80 mm |
Half a US size is about 1.3 mm of circumference. The half-size rule is a typical difference, not a law; measure both hands when you can.
Worked example: a ring from the right hand
A right-handed person wears a US 7 ring on the right ring finger. For a wedding band on the left, start from US 6½ (53.14 mm) and confirm with a gauge. If the left knuckle is large, the in-between rule from our knuckle guide may bring it back to 6¾.
Rings worn on the right hand
In several countries the wedding ring is traditionally worn on the right hand; Wikipedia's wedding ring article lists Bulgaria, Poland and Russia, and describes a similar custom in Germany. If you are right-handed and follow that custom, the ring goes on your larger hand, so do not size down from a left-hand ring.
Sources
Size values on this page are calculated with the Ring Size Tools conversion engine from the published definitions listed on the methodology page. Fit advice is attributed to the sources above.