Conversion

Converting a French or continental ring size to US and UK

By the Ring Size Tools editorial team · Updated 2026-11-07 · How we calculate sizes

The ISO 8653 size is the inside circumference in millimeters, so a ring listed as 54 is about 54 mm around, which is near US 7 (54.4 mm). Check that your seller means ISO before converting.

ISO circumference to US, UK and Japan

USCircumference (mm)EU (ISO 8653)UKJapan
549.349J½9
651.952L½12
754.454N½14
857.057P½16
959.560R½19
1062.162T½21

Calculated from the US definition (diameter in inches = 0.458 + 0.032 × size); UK BS 6820, EU (ISO 8653 inside circumference) and Japan JCS values rounded to the nearest listed size.

Method

  1. Find the seller's number and whether the page says mm, circumference or diameter.
  2. If it is circumference in mm, match it to the table.
  3. If it is a diameter, multiply by pi (3.1416) to get circumference.
  4. Ask the seller when the page names no unit.

Worked example

Suppose a listing offers sizes 52, 54 and 56 and you wear US 7. US 7 is 54.4 mm, so 54 is the match; 52 would be about 2.4 mm too small and 56 about 1.6 mm too large. This is an illustration of the arithmetic, not a real listing.

Where numbers differ

Some regional scales are offset from the ISO circumference, and a bare number cannot tell you which is meant. The standard defines the size by the inside circumference, so a millimeter figure from the seller or a ring you own is the safest common ground (ISO 8653; Wikipedia, Ring size).

Keep a record

Save the listing screenshot, the seller's size chart and the millimeter figure you used, with the date. If the ring arrives wrong, that record shows whether the chart, the measurement or normal swelling is the cause. Fingers vary with temperature and time of day (GIA), and Jewelers Mutual notes titanium, tungsten, stainless steel and ceramic rings generally cannot be resized, so check those listings most carefully.

Sources

Size values on this page are calculated with the Ring Size Tools conversion engine from the published definitions listed on the methodology page. Fit advice is attributed to the sources above.