Measuring

Ring circumference to ring size: how to convert millimeters

By the Ring Size Tools editorial team · Updated 2026-11-06 · How we calculate sizes

Circumference is the cleanest way to size a ring because every system is defined from it. Inside circumference of 54 mm is EU 54, a diameter of 17.19 mm, and US 6.84, so the nearest quarter size is US 6¾. Divide a circumference by 3.1416 to get diameter, or multiply a diameter by 3.1416 to go back.

Circumference to US, UK and Japan

Inside circumference (mm)Diameter (mm)US exactUS nearest ¼UKJapan
4815.284.494½I½8
5015.925.275¼K10
5216.556.056L½12
5417.196.846¾N14
5617.837.627½P15
5818.468.408½Q½17
6019.109.189¼S19
6219.749.9710T½21
6420.3710.7510¾V23
6621.0111.5311½X25
6821.6512.3212¼Y½27
7022.2813.1013Z+129

Calculated: US diameter in inches = 0.458 + 0.032 × size; UK BS 6820 A = 37.50 mm, +1.25 mm per letter; Japan JCS 1 = 13.0 mm diameter, +1/3 mm per size.

How to use it

Wrap a strip of paper, not stretchy string, snugly around the base of the finger, mark the overlap and measure the strip in millimeters. That number is your circumference. Because ISO 8653 defines ring size as inside circumference, the number is directly the EU size. GIA describes the same paper or string wrap approach as a home method.

Round up to the next table row if you fall between two, and add a little room for a band wider than about 6 mm, since wide bands fit more tightly than the same size in a thin band.

Worked example

Suppose a strip marks at 57.3 mm. That lies between EU 57 and EU 58. EU 57 is US 8.01 (nearest quarter size 8), EU 58 is US 8.40. A thin band would suit 57 or 58; a wide band would suit 58. This is an illustration of the arithmetic, not a measured result from a person.

Where the numbers stop being exact

Charts round differently, and a finger changes size across a day. A 1 mm change in circumference is about 0.4 of a US size, so small measuring errors matter. If a seller publishes its own chart, trust it for that seller's rings.

Sources

Size values on this page are calculated with the Ring Size Tools conversion engine from the published definitions listed on the methodology page. Fit advice is attributed to the sources above.