Size systems
EU and ISO ring sizes explained, with a full conversion table
By the Ring Size Tools editorial team · Updated 2026-11-05 · How we calculate sizes
A European ring size is simply the inside circumference of the ring in millimeters. ISO 8653 defines ring sizes this way, from 41 to 76, and Europe adopted it as EN ISO 8653:2026 in May 2026. So EU 54 means 54 mm around the inside, which is US 6.84 on the US scale: the nearest quarter size is 6¾, and a 7 is the safer choice for a wide band.
What the number means
ISO 8653:2016 sets the ring size equal to the inside circumference in millimeters and lists ring-stick sizes from 41 to 76. CEN, the European standards body, adopted it unchanged as EN ISO 8653:2026, replacing the older EN 28653:1992. Germany, Austria, the Nordic countries, France and most of continental Europe label rings this way, and Japan's industrial standard JIS S 4700 follows the same circumference basis.
Because each EU size is exactly 1 mm of circumference, EU steps are finer than whole US sizes (2.55 mm) and close to UK half letters (0.625 mm) and US quarter sizes (0.64 mm).
EU to US, UK and Japan
| EU (mm around) | Diameter (mm) | US exact | US nearest ¼ | UK (BS 6820) | Japan (JCS) |
|---|
| 44 | 14.01 | 2.92 | 3 | F | 4 |
| 45 | 14.32 | 3.31 | 3¼ | G | 5 |
| 46 | 14.64 | 3.70 | 3¾ | H | 6 |
| 47 | 14.96 | 4.09 | 4 | H½ | 7 |
| 48 | 15.28 | 4.49 | 4½ | I½ | 8 |
| 49 | 15.60 | 4.88 | 5 | J | 9 |
| 50 | 15.92 | 5.27 | 5¼ | K | 10 |
| 51 | 16.23 | 5.66 | 5¾ | L | 11 |
| 52 | 16.55 | 6.05 | 6 | L½ | 12 |
| 53 | 16.87 | 6.44 | 6½ | M½ | 13 |
| 54 | 17.19 | 6.84 | 6¾ | N | 14 |
| 55 | 17.51 | 7.23 | 7¼ | O | 15 |
| 56 | 17.83 | 7.62 | 7½ | P | 15 |
| 57 | 18.14 | 8.01 | 8 | P½ | 16 |
| 58 | 18.46 | 8.40 | 8½ | Q½ | 17 |
| 59 | 18.78 | 8.79 | 8¾ | R | 18 |
| 60 | 19.10 | 9.18 | 9¼ | S | 19 |
| 61 | 19.42 | 9.58 | 9½ | T | 20 |
| 62 | 19.74 | 9.97 | 10 | T½ | 21 |
| 63 | 20.05 | 10.36 | 10¼ | U½ | 22 |
| 64 | 20.37 | 10.75 | 10¾ | V | 23 |
| 65 | 20.69 | 11.14 | 11¼ | W | 24 |
| 66 | 21.01 | 11.53 | 11½ | X | 25 |
| 67 | 21.33 | 11.93 | 12 | X½ | 26 |
| 68 | 21.65 | 12.32 | 12¼ | Y½ | 27 |
| 69 | 21.96 | 12.71 | 12¾ | Z | 28 |
| 70 | 22.28 | 13.10 | 13 | Z+1 | 29 |
Calculated from the published definitions: US diameter in inches = 0.458 + 0.032 × size; UK BS 6820 A = 37.50 mm, +1.25 mm per letter; Japan JCS size 1 = 13.0 mm diameter, +1/3 mm per size. Other charts may round a quarter size differently.
Worked example: an EU 52 ring
A ring listed as EU 52 is 52 mm around and 16.55 mm across. On the US scale that is 6.05, so the nearest quarter size is US 6. If your usual US size is 6, EU 52 is very slightly larger; if you are a 6¼, EU 52 is very slightly small but within a quarter size.
French and other numbering
French ring sizes use the same circumference basis in practice, so French 54 and EU 54 are the same ring. Swiss, Italian and Spanish sizes are often written as circumference minus 40 (EU 54 = Swiss 14). That shortcut is a convention used by jewelers rather than a published standard, so check the seller's chart. See French ring sizes.
Sources
Size values on this page are calculated with the Ring Size Tools conversion engine from the published definitions listed on the methodology page. Fit advice is attributed to the sources above.