Size ranges

Men's ring size guide: US 8 to 13 in millimeters

By the Ring Size Tools editorial team · Updated 2026-11-06 · How we calculate sizes

Ring size standards do not separate men and women; a US 10 is 19.76 mm across for everyone. This guide lists the US 8 to 13 range often searched for men, with millimeter equivalents so you can check against a measurement instead of a label.

US 8 to 13 in half sizes

US sizeCircumference (mm)Diameter (mm)UKJapan
857.018.14P½16
8.558.218.54Q½18
9.059.518.95R½19
9.560.819.35S½20
10.062.119.76T½21
10.563.420.17U½23
11.064.620.57V½24
11.565.920.98W½25
12.067.221.39Y26
12.568.521.79Z27
13.069.722.20Z+129

Calculated: US diameter in inches = 0.458 + 0.032 × size; UK BS 6820 A = 37.50 mm, +1.25 mm per letter; Japan JCS 1 = 13.0 mm diameter, +1/3 mm per size.

Why this range, and what comes after

US 8 to 13 covers the sizes most often searched for men, but it is only a slice of the scale: each whole size adds 0.032 in (0.81 mm) of diameter and about 2.55 mm of circumference, and the same rule continues in both directions. A US 13 is a little over 66 mm around, and the same arithmetic gives any size outside the table. Because the numbers come from the published definition rather than a brand, a ring marked US 11 should measure the same inside diameter whoever it is sold to. Differences between sellers come from rounding and manufacturing tolerance, which is why a seller's own chart is the final word for that seller.

Wide bands

A band wider than roughly 6 mm covers more of the finger and usually feels tighter than a thin band in the same size. Jewelers Mutual and David Yurman both discuss measuring for the band you will wear; compare your measurement with the table and consider going up a half size for a wide band, then verify with the seller's policy.

Check against your measurement

Measure the base of the finger in millimeters (see the circumference guide), then find the nearest row. Measure at the end of the day, not when cold. Sizes above 13 follow the same rule; use the full chart.

Sources

Size values on this page are calculated with the Ring Size Tools conversion engine from the published definitions listed on the methodology page. Fit advice is attributed to the sources above.