Converting sizes

How to check a seller's ring size chart

By the Ring Size Tools editorial team · Updated 2026-11-06 · How we calculate sizes

Take any size on the seller chart and compare its millimeters with the standard value: US 7 should be 17.32 mm across or 54.4 mm around. A difference under about 0.3 mm is normal rounding; much more means the chart uses a different basis.

Reference values to compare against

USDiameter (mm)Circumference (mm)UKEUJapan
515.7049.3J½499
616.5151.9L½5212
717.3254.4N½5414
818.1457.0P½5716
918.9559.5R½6019
1019.7662.1T½6221

Calculated from the US definition (diameter in inches = 0.458 + 0.032 × size); UK BS 6820, EU (inside circumference in mm, ISO 8653) and Japan JCS equivalents rounded to the nearest listed size.

Three-step audit

  1. Read the unit and whether it is diameter or circumference.
  2. Pick two sizes and compare with the reference table above.
  3. Look for the seller's exchange policy and whether the material can be resized.

Worked example

Suppose a listing says size 8 is 57.0 mm. The reference gives 57.0 mm around, so the chart is circumference and within rounding of the standard. If it instead listed 57.0 mm for size 7, it would be about 2.6 mm larger than the standard, and you should ask what basis it uses. This is a hypothetical listing.

Keep a record

As a habit, write down the measured millimeters, the unit and the date next to the size you chose, and keep the seller's chart page or a screenshot of it with the order. If the ring arrives and feels wrong, that record lets you tell quickly whether the problem is the chart, your measurement or normal day-to-day swelling, and it makes an exchange request much easier to explain. Fingers also change with temperature and time of day (GIA, Jewelers Mutual), so repeat a measurement on a second day before you commit to a size that cannot be resized.

Which chart to follow

For a specific ring, follow the seller's millimeter value, since that is what will be made. Use a generic chart to check it, and use a measured inside diameter of a ring that already fits as the final test. Jewelers Mutual notes that some materials cannot be resized, which raises the cost of trusting a wrong chart.

Sources

Size values on this page are calculated with the Ring Size Tools conversion engine from the published definitions listed on the methodology page. Fit advice is attributed to the sources above.