Measuring

Measuring a ring you already own

By the Ring Size Tools editorial team · Updated 2026-11-06 · How we calculate sizes

Measure straight across the inside of a ring that fits, from inner edge to inner edge, and match the millimeters: 16.51 mm is US 6 and 17.32 mm is US 7. GIA lists measuring an existing ring as a standard at-home method.

Inside diameter to size

USDiameter (mm)Circumference (mm)UKEUJapan
515.7049.3J½499
5.516.1050.6K½5110
616.5151.9L½5212
6.516.9253.1M½5313
717.3254.4N½5414
7.517.7355.7O½5615
818.1457.0P½5716
8.518.5458.2Q½5818
918.9559.5R½6019
1019.7662.1T½6221

Calculated from the US definition (diameter in inches = 0.458 + 0.032 × size); UK BS 6820, EU (inside circumference in mm, ISO 8653) and Japan JCS equivalents rounded to the nearest listed size.

Method

  1. Pick a plain ring that fits the same finger comfortably.
  2. Measure across the inside at the widest point, edge to edge, with a ruler in millimeters, or a caliper if you have one.
  3. Repeat two or three times and average.
  4. Look up the value in the table.

Keep a record

As a habit, write down the measured millimeters, the unit and the date next to the size you chose, and keep the seller's chart page or a screenshot of it with the order. If the ring arrives and feels wrong, that record lets you tell quickly whether the problem is the chart, your measurement or normal day-to-day swelling, and it makes an exchange request much easier to explain. Fingers also change with temperature and time of day (GIA, Jewelers Mutual), so repeat a measurement on a second day before you commit to a size that cannot be resized.

Where it goes wrong

Measuring the outside instead of the inside adds twice the band thickness. A comfort-fit or wide ring can feel different from a thin one at the same size, and GIA notes the ring finger on the other hand can differ by about half a size, which is 1.3 mm of circumference. A ruler also has about 0.5 mm of reading error, which is more than half a size.

Worked example

Suppose three readings are 17.3, 17.5 and 17.4 mm. The average is 17.4 mm, between US 6.75 and US 7 (17.32 mm). Since removing metal is easier than adding it (GIA), the larger size is the safer pick. This is an illustration.

Sources

Size values on this page are calculated with the Ring Size Tools conversion engine from the published definitions listed on the methodology page. Fit advice is attributed to the sources above.