Gifts

Using a ring size converter when the ring is a gift

By the Ring Size Tools editorial team · Updated 2026-11-07 · How we calculate sizes

Measure a ring the person already wears: its inside diameter times pi is the size in millimeters. A 17.3 mm diameter is 54.4 mm, US 7. Allow for the wrong finger and pick a store with exchanges.

Diameter to size for a borrowed ring

Inside diameter (mm)Circumference (mm)USUKEU
15.7049.35J½49
16.5151.96L½52
17.3254.47N½54
18.1457.08P½57
18.9559.59R½60
19.7662.110T½62

Calculated from the US definition (diameter in inches = 0.458 + 0.032 × size); UK BS 6820, EU (ISO 8653 inside circumference) and Japan JCS values rounded to the nearest listed size.

Measuring without asking

  1. Pick a ring worn on the same finger, if you can tell.
  2. Measure its inside diameter edge to edge in mm.
  3. Multiply by 3.1416 and read the table.
  4. Note whether the ring is wide, since wide bands fit tighter (GIA).

Worked example

Suppose the borrowed ring measures 16.5 mm inside. That gives 51.8 mm, near US 6 (51.9 mm) and US 6½ (53.1 mm). Because a ring that is too small is harder to correct than one slightly large, ordering 6½ with an exchange option is reasonable. Illustration only.

Plan for an exchange

Choose a seller with free exchange or resizing, tell the recipient it may be adjusted, and avoid unresizable metals for a guessed size (Jewelers Mutual).

Keep a record

Save the listing screenshot, the seller's size chart and the millimeter figure you used, with the date. If the ring arrives wrong, that record shows whether the chart, the measurement or normal swelling is the cause. Fingers vary with temperature and time of day (GIA), and Jewelers Mutual notes titanium, tungsten, stainless steel and ceramic rings generally cannot be resized, so check those listings most carefully.

Sources

Size values on this page are calculated with the Ring Size Tools conversion engine from the published definitions listed on the methodology page. Fit advice is attributed to the sources above.