Converting sizes
UK to US ring size table with exact millimeters
By the Ring Size Tools editorial team · Updated 2026-11-06 · How we calculate sizes
US 7 is 54.4 mm around and maps to UK N½; US 7.5 is 55.7 mm and maps to UK O½. Because the systems step differently, a converted size is the nearest listed size, not an identical one.
US sizes with the nearest UK letter
| US | Diameter (mm) | Circumference (mm) | UK | EU | Japan |
|---|
| 5 | 15.70 | 49.3 | J½ | 49 | 9 |
| 5.5 | 16.10 | 50.6 | K½ | 51 | 10 |
| 6 | 16.51 | 51.9 | L½ | 52 | 12 |
| 6.5 | 16.92 | 53.1 | M½ | 53 | 13 |
| 7 | 17.32 | 54.4 | N½ | 54 | 14 |
| 7.5 | 17.73 | 55.7 | O½ | 56 | 15 |
| 8 | 18.14 | 57.0 | P½ | 57 | 16 |
| 8.5 | 18.54 | 58.2 | Q½ | 58 | 18 |
| 9 | 18.95 | 59.5 | R½ | 60 | 19 |
| 10 | 19.76 | 62.1 | T½ | 62 | 21 |
Calculated from the US definition (diameter in inches = 0.458 + 0.032 × size); UK BS 6820, EU (inside circumference in mm, ISO 8653) and Japan JCS equivalents rounded to the nearest listed size.
Why rounding happens
The US scale steps by 0.032 in of diameter per whole size, and ISO 8653 defines size by inside circumference, which is how the EU and many UK retail charts work in practice. The two scales have different step lengths, so a US size rarely lands exactly on a letter. A converter has to pick the closest one, and that choice can sit a fraction of a millimeter either way.
Worked example
Suppose you are a US 7.25. The core calculation gives 55.06 mm around, UK O and EU 55. A UK seller offering only whole letters may give you a ring that is a few tenths of a millimeter off, which is below what most people feel, but is worth knowing if you sit between sizes. This is an illustration of the arithmetic.
How to use it
Convert from a measured millimeter value rather than from a remembered size, then confirm the seller's own chart. If the listing quotes a different circumference for the same label, trust the listing for that item and ask about exchanges.
Sources
Size values on this page are calculated with the Ring Size Tools conversion engine from the published definitions listed on the methodology page. Fit advice is attributed to the sources above.